MIKROTIK BGP SCRIPT GENERATOR

Border Gateway Protocol Configuration Suite

Global Parameters

BGP Mode

Strategy

Auto Full-Mesh Topology

Every router peers with every other router.

Config: Router 1

AS Number

Router ID

BGP Interface

Interface IP/CIDR

Network Advertisement

Manual Peers Name, IP, ASN

Local Routing Filters

mikrotik-config.rsc

### IBGP for Router 1 (V6) Configuration
### Date: 26/01/2026
### Script generated by MikroTik BGP React Generator

### IP Interface Configuration
/ip address add address=10.0.0.1/24 interface=ether1 comment="BGP Target Interface"

### Loopback Interface
/interface bridge add name=loopback comment="Loopback interface for BGP Router ID"
/ip address add address=1.1.1.1/32 interface=loopback comment="Loopback IP for BGP Router ID"

### Static Routes for Loopback Peering

### BGP Instance Configuration
/routing bgp instance add name=IBGP-R1 as=65001 router-id=1.1.1.1 redistribute-connected=yes

### BGP Peer Configuration

### Network Advertisement
/routing bgp network add network=192.168.1.0/24

/ip firewall filter add chain=input protocol=tcp dst-port=179 action=accept comment="Allow BGP"

Expert Global Routing Filters

Enabled

These rules are applied to all routers. Write valid MikroTik filter command syntax. v6 uses prefix=..., v7 uses rule=...